Barreras Vehiculares por FAAC

620

620-1

THE IDEAL SOLUTION FOR HEAVY TRAFFIC

The Standard 620 for barriers of up to 5 m is suitable for heavy but not continuous traffic. The barrier is supplied with a wide range of accessories, including a skirt to prevent unwanted break-ins.

TOTALLY FLEXIBLE

The FAAC 620 range is equipped with electronic deceleration at opening and closing. A version with articulated beam for low ceilings is available on request.

LONG TERM RELIABILITY

Use of cutting-edge materials and treatments such as cataphoresis and niploy, plus tried-and-tested FAAC hydraulic technology, all combine to ensure long-life.

LEADING-EDGE TECHNOLOGY

SMT microprocessor electronic technology is supplied standard to ensure exceptional performance. By means of an optional card, the barrier can also control auxiliary services and an additional opposing beam. Barrier statuses can be signalled to traffic control devices.

ELECTRONIC INTELLIGENCE

The electronic intelligence of the 620 range functions by means of three differentiated logics: automatic, semi-automatic and parking (P) - the latter was expressly designed for automatic parking systems.

SPECIFICATIONS

Automatic barrier for beams up to 5 m • Use frequency 70% • Opening/closing time 3.5s (3 m) 4.5s (5m) • Actuating system consisting of hydraulic pump unit, plunger pistons, equaliser and transmission shaft • Balancing by compression spring • Internal stops adjustable for open or closed beam positions • Load bearing housing in steel protected by cataphoresis treatment and polyester powder paint RAL 2004 • Overall dimensions (L x W x H) 200x380x1080 mm • Protection class IP 44 • Release device accessible from the outside by triangular or customised key (optional) • Hydraulic pump unit with hydraulic locking on opening and closing • Electric motor power supply 230 V (+6% -10%) - 50(60) Hz • Electric motor power 220 W • Thermal protection at 120°C built into motor winding • Operating ambient temperature -20°C +55°C • Single-phase motor with two rotation directions (1.400 rpm) • Hydraulic gerotor pump (max low noise) • Pump flow rate 0.75-1 l/m • Die-cast distribution flange • Separate control of opening and closing force by by-pass valves • Anti-crushing safety to UNI 8612 standards • Tank in anodised aluminium • Mineral hydraulic oil with additives • Travel-limit deceleration • Adjustable deceleration angle by cams • Designed to accommodate rectangular, rectangular with skirt, articulated rectangular, in anodised aluminium, round, round pivoting beams • Built-in electronic control board

640

Articulacion

Faldon

THE RIGHT SOLUTION FOR LARGE INDUSTRIAL ACCESSES

With its length of 4 to 7 metres, the FAAC 640 range is ideal for traffic-control in large industrial accesses, with particularly demanding use.

RELIABLE AND RESISTANT

Use of cutting-edge materials and treatments such as cataphoresis and niploy, plus tried-and-tested FAAC hydraulic technology, all combine to ensure long-life.

HIGH-TECH

SMT microprocessor electronic technology is supplied standard to ensure exceptional performance. By means of an optional card, the barrier can also control auxiliary services and an additional opposing beam. Barrier statuses can be signalled to traffic control devices.

PRECISE STOPPING

Perfectly calibrated stopping thanks to the adjustable electronic brake that slows down closing and opening movement. A thermal probe detects temperature and activates a cooling fan.

SPECIFICATIONS

Automatic barrier for beams up to 7 m • Use frequency 100% • Opening/closing time from 4 to 8 s • Activation system comprising table for hydraulic pump unit, plunger pistons, equaliser and transmission shaft • Balancing by compression spring • Internal stops adjustable for open or closed beam positions • Load bearing housing in steel protected by cataphoresis treatment and polyester powder paint RAL 2004 • Overall dimensions (L x W x H) 230x390x1080 mm • Protection class IP 44 • Release device accessible from the outside by triangular or customised key (optional) • Hydraulic pump unit with hydraulic locking at opening and closing • Electric motor power supply 230 V (+6% -10%) - 50(60) Hz • Electric motor power 220 W • Thermal protection at 120°C built into motor winding • Operating temperature -20°C +55°C • Single-phase motor with two rotation directions (1,400 rpm) • Hydraulic gerotor pump (max low noise) • Pump flow rate 0.75-1-1.5-2 l/m • Die-cast distribution flange • Separate control of opening and closing force by by-pass valves - Anti-crushing safety to UNI 8612 standard • Tank in anodised aluminium • Mineral hydraulic oil with additives • Travel-limit deceleration • Adjustable deceleration angle by cams • Automatically activated cooling ventilation • Designed to accommodate rectangular, rectangular with skirt beams • Built-in electronic control equipment